All computers are highly sensitive to their environment. To function efficiently, they require specific temperature, humidity, and filtration conditions. Failure to meet these specified conditions can result in distorted or lost data and even complete shutdown of computer services.
Compu-Aire understands the special environmental control needs of computer, electronic and telecommunications rooms.
The Compu-Mate units DX systems are suitable for non-ducted
application designed for indoor wall and floor mount evaporator
section with a matching outdoor condensing unit.
Low & compact system
that allows for easy access,
installation and service
The Compu-Mate indoor module can be installed against the wall or can be wall mounted with the available optional wall brackets inside any room. Its low and compact system allows for easy access, installation and service.
1 Ton
1.5 Ton
2 Ton
Compact Cabinet:
(optional)
Standard Cabinet:
3 Ton
5 Ton
Designed for Refrigerant R-410A
Quiet Operation
The scroll compressor is vibration isolated from the chassis. The zinc coated steel cabinet is insulated to ensure quiet operation.
Compact or Standard Cabinet
nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.
Condensing Units Available:
Propeller Fan Condensing Unit
PFCU
The PFCU shall consist of Casing, Condenser Coil, and Direct-drive Propeller Fan(s) driven by individual Fan Motor(s), Fan Guard and Mounting
base.
Centrifugal Fan Condensing Unit
CFCU
The CFCU Cabinet shall be constructed of heavy gage galvanized steel. Access panels shall be provided for ease of service.
Water Cooled Condensing Unit
WCCU
The WCCU Cabinet shall be constructed of heavy gage galvanized steel. Access panels shall be provided for ease of service.
pGD1 Controller
Advanced Microprocessor
The 2500 series a microprocessor-based electronic controller developed in compliance with the European RoHS standards. It provides a solution for many applications in the air-conditioning and refrigeration sectors ensuring absolute versatility, allowing specific products to be created to customer request. 2500 series runs the control program, and is fitted with the set of terminals required for connection to the devices (compressors, fans...). The program and the parameters are saved to FLASH-MEMORY and E2promfor safe keeping even in the event of power failures (without requiring a backup battery). PCO3 also allows connection to the pLAN (pCO Local Area Network) and can be connected, as well as to other pCO3 controllers. All the controllers in the pLAN can exchange information (variables, digital or analogue, depending on the application software used) at high transmission speed.
Supports up to 32 units locally,
including pCO controllers and terminals.
Stand Alone Networks
Local and remote monitoring can be achieved with our advanced microprocessor controller. Based systems are used to provide standalone supervision and control over a pLAN network giving the flexibility of a BMS system at the fraction of the cost.
The p-LAN communication option allows two or more systems to talk to each other, p-LAN can be programmed for system rotation and for system failure over redundancy.
© Compu-Aire 2023. All Rights Reserved.